EasyManua.ls Logo

Grasshopper 723T - User Manual

Grasshopper 723T
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S
MANUAL & PARTS LIST
RIDING MOWER
MODELS
723T & 727T
6
THE GRASSHOPPER COMPANY
Moundridge, Kansas 67107 U.S.A.
Phone (620) 345-8621
Fax (620) 345-2301
Form 172217-090508
Printed in U.S.A.
Price $7.00

Table of Contents

Questions and Answers

  • M
    Mrs. Heather SteinAug 6, 2025
    How to adjust the parking brake on a Grasshopper 723T?
    • T
      tategloriaAug 6, 2025
      To adjust the parking brake on your Grasshopper Lawn Mower, follow these steps: 1. Individually disconnect the right brake linkage rod. 2. Adjust the linkage pin on the left brake until it requires 14 lbs of pull at the hand lever's top to engage the parking brake. Adjust the brake linkage rod if needed. 3. Connect the right brake linkage. 4. Disconnect the left brake linkage rod and adjust the linkage pin on the right brake until 14 lbs of pull are needed at the hand lever to apply the parking brake. 5. Connect the left brake linkage. With both connected, it should take 28 lbs of pull to apply the brake. Adjust the brake linkage rod as necessary.
  • M
    Mary SmallNov 20, 2025
    How to adjust the neutral on a Grasshopper Lawn Mower?
    • W
      William FletcherNov 20, 2025
      To adjust the neutral on your Grasshopper Lawn Mower: 1. Elevate the tractor frame, ensuring both drive wheels are off the ground, and release the parking brake. 2. Detach the linkage rod from the transmission control arm. 3. Position the steering levers in the neutral swing-out. 4. Start the engine; if either drive wheel turns, proceed with the adjustment by loosening the locking nut and rotating the pivot bolt until neutral is achieved. Tighten the locking nut. 5. Repeat for the other side transmission. 6. Reinstall the linkage rod in the control arm, adjusting the rod's length if needed to ensure it slides into the control arm without moving it, maintaining the neutral adjustment. 7. Test drive the machine to ensure straight-line travel with both levers fully forward. If it devi...

Summary

Tractor Model Specifications

Understanding Safety Symbols

Identification of Safety Decals

Safety Information

Safe Fuel Handling Practices

Precautions for refueling, fuel storage, and preventing fire hazards.

Operational Safety Procedures

Safe operating practices, including slope use and hazard avoidance.

Safety During Maintenance

Critical safety measures to follow during machine maintenance.

Operation

Pre-Start Safety Checklist

Essential checks before starting the engine for safe operation.

Daily Safety Interlock System Test

Procedure to test the daily functionality of safety interlock systems.

Engine Starting Procedure

Operating on Uneven Terrain

Engine Stopping Procedure

Moving Unit Without Engine Power

Steering Lever Operation Guide

Lubrication and Maintenance

Changing Drive System Fluid and Filter

Detailed steps for replacing drive system fluid and filter.

Adjustments and Troubleshooting

Troubleshooting Drive System Power Loss

Diagnosing and resolving issues causing loss of power.

Steering Lever Neutral Adjustment

Procedure to adjust steering levers for proper neutral alignment.

Engine Starting Troubleshooting Guide

Common engine starting problems and their solutions.

Adjusting Steering Lever Position

Traction Kit Installation

Parts Lists and Illustrations Introduction

723 T Tractor Assembly Parts List

727 T6 Tractor Assembly Parts List

Drive Assembly Parts List

Brake Assembly Parts List

ROPS and Seat Assembly Parts List

PTO Shaft and Clutch Assembly Parts List

Steering Assembly Parts List

Tractor Wiring Diagram

Hydraulic Lift Assembly Parts List

Grasshopper 723T Specifications

General IconGeneral
BrandGrasshopper
Model723T
CategoryLawn Mower
LanguageEnglish

Related product manuals