EasyManua.ls Logo

GRAUPNER 65 - Foreword; Brief description of the product; Intended use; Technical data

GRAUPNER 65
63 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
23
22
Foreword
Thank you for purchasing the Graupner "GR65" model, order No. 21009. Graupner/SJ models
stand for high quality. We take care to ensure stability at the key junctures in mass production.
You must read through every part of these instructions before assembling and using the model.
Follow the safety instructions in the manual for test runs and when using the model for the rst time.
Attention!
You must read through every part of these instructions before assembling and using the
model.
!
Intended use
The model was designed as a model ship, operating on waters which
comply with the provisions of this manual and is only suitable for this purpose.
For any mishandling, outside of these provisions there is no guarantee or liability.
This model is one of the GRAUPNER/SJ sailboat series. These models are almost nished
constructed and painted. To make the model ready to sail, just install the RC components and the
battery and the model can be used.
Brief description of the product
Length 655 mm
Hull length. 650 mm
Beam, approx 85 mm
Overall height approx. 1360 mm
Mast size above deck 1002 mm
Weight RC system incl., drive battery excl. 1020 g
Technical data

Related product manuals