19 / 24
16540_jh_V1
Click on "File" to load the corresponding firmware file named
"MicroStabi7X_V_XX.bin" from the hard disc ("XX" stands for the
version number).
When the file has loaded, click on start...
... connect the receiver and switch it on.
The progress bar shows that the transfer is running normally.
The receiver LED lights up red and green during this process
and flashes red and green alternately once the transfer is com-
plete.
Please refer to the detailed update instructions for the item in
question in the Download area at www.graupner.de.
Declaration of conformity
16540.RTF HoTT Hornet
Graupner/SJ declares that the product is conform to EU norms.
EN 62479:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 301 489-1 V1.9.2; EN 301 489-3 V1.6.1
EN 300 440-1 V1.6.1; EN 300 440-2 V1.4.1
EN 300 328 V1.9.1
The Declarations of conformity of the single components are
included in the manuals of the related components.
To Next Page
Loading...