9 / 24
16540_jh_V1
Safety notes during the use
WARNING
• Also while programming, make sure that a connected elec-
tric motor cannot accidentally start. Injury risk by the turning
propellers! Always remove the propellers when program-
ming. Program always the motors stop switch on the trans-
mitter. (See transmitter manual)
• Avoid shock and pressure. Check the HoTT Hornet regularly
for damages to the housings and cables, specially after a
crash of the model. Damaged or wet electronic compo-
nents, even if re-dried, should no longer be used!
• Never touch the turning propellers, this can cause serious
injury.
• The propellers must be mounted securely, thrown parts can
cause serious injury.
• Keep long hair, loose clothing such as scarves, loose shirts
or similar well away from the danger zone of the revolving
propeller, they may be withdrawn by the propeller, flying
debris can cause serious injury.
Follow the safety notes of the included mz-12 transmitter.
Note:
After you perceive your model, check if all components are
inside the package and eventual damages.
Remove the battery from the model when transporting or when
not in use.
During transport protect the model and the transmitter from
damages.
The front arms of the copter can be folded for transport.
Care:
Clean the Copter, the battery and the charger only with the suit-
able cleaners. Good is a spirit-free cloth. Never use chemical
cleaners, solvents, petrol, alcohol or similar.
To Next Page
Loading...