20 / 76
13410_13410.100_HU_V.1
Required tools and adhesives
Scalpel knife No. 982
Scissors
Triangle ruler
Tweezers
Cross Screwdriver No. 5779.0
Fork key 3.5/5/5,5/8/10/13
Hex key 1,5 mm No.B8001
Hex key 2 mm No.B8001
Hex key 2,5 mm No.B8001
Drill 1,2 mm
Drill 1,8 mm
Drill 2,0 mm
Cyano glue thick No. 5821
Activator for cyano glue No.953.150
Phon
Symbols explication
Always observe the information indicated by this warning sign. Par-
ticularly those which are additionally marked with the CAUTION or
WARNING. The signal word WARNING indicates the potential for
serious injury, the signal word CAUTION indicates possibility of
lighter injuries.
The signal word Note indicates potential malfunctions.
Attention indicates potential damages to objects.
Centre of gravity
This symbol shows the position of the center of gravity and is sup-
ported with measurements or arrows if necessary.
Gluing notes!
This symbol shows that cyano glue thick no. 5821 is to be used and
is supported with measures or arrows if necessary. Pay attention to
the hazard notices on the package.
Safety notes
General
These safety instructions are intended not only to protect your own
and other people’s safety, but also to protect the product. Therefore
please read this section very carefully before using the product!
After you perceive your model, check if all components are inside
the package and eventual damages.
To Next Page
Loading...
