GRAUPNER mc-32

243
Detail program description - Telemetry
VOLT:
MODELTIME:
BATTERYTIME:
TIMER(GE.)CENTER:
TIMER(GE.)TOP:
TIME:
PHASE TIMER:
RECEIVER
After selection of the desired menu line with the 
selection keys of the left or right touch pad …
VOICE TRIGGER
TRIG
TRANSMIT
VARIO
1
8
RECEIVER
… and a subsequent tap on the center SET key of
the right touch pad will open the selected sub-menu:
TEMP:
STRENGHT:
VOLT:
FLUGZEITUHR:
LOWVOLT:
UHRZEIT:
Here, after selection of the desired line with the 
selection keys of the left or right touch pad and a
subsequent tap on the center SET key of the right
touch pad, the selected voice message can be
activated ( ) or deactivated ( ).
SENSOR
This line only appears if a sensor was fi rst activated
in the »SENSOR SELECT« sub-menu. For example,
if the »VARIO« sensor is selected then the selections
for the "VARIO" line will be opened …
VOICE TRIGGER
TRANSMIT
VARIO
8
RECEIVER
VARIO
when a subsequent tap on the center SET key of the
right touch pad calls up the sub-menu.
ALT:
MAXALT:
MINALT:
FLUGZEITUHR:
VOLT MINIMUM:
UHRZEIT:
As described in the column at the left, these menus
also allow every offered voice message to be
activated ( ) or deactivated ( ) by selecting the
desired line followed by a tap on the center SET key
of the right touch pad.
Note:
The selection made here is completely independent
of the "VARIO" voice triggers.