Need help?Do you have a question about the GRAUPNER MC-32EX and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Frequency | 2.4 GHz |
| Telemetry | Yes |
| Display | Color Touchscreen |
| Modulation | Hopping Telemetry Transmission (HOTT) |
Detailed specifications for the Graupner mc-32ex HoTT radio control transmitter.
Technical specifications for the WLAN functionality of the transmitter.
Technical specifications for the Bluetooth 3.0+EDR functionality.
Explanation of warning symbols used in the manual and on the device.
Important safety instructions for operating the transmitter and models.
Precautions for safe handling of the radio control transmitter.
Precautions for safe handling and charging of transmitter batteries.
Identification and function of components on the front of the transmitter.
Identification and function of components on the back of the transmitter.
Instructions on how to safely open the transmitter for internal access.
Step-by-step guide for safely removing the transmitter battery.
Step-by-step guide for safely inserting and connecting the transmitter battery.
Instructions on adjusting and configuring the control sticks.
Instructions on how to properly close the transmitter after access.
Details on various connection ports and attachment points on the transmitter.
Information on attaching the smartphone holder and transmitter strap.
Details on the foldable bracket mechanism for the transmitter strap.
Details of connection ports located under the left upper flap.
Explanation of the DSC connection port and its usage.
Explanation of the DATA connection port and its usage.
Explanation of the COM/TRG connection port and its usage.
Explanation of the AUDIO connection port and its usage.
Details of connection ports located under the right upper flap.
Explanation of the USB C connection port for charging and data.
Instructions on how to charge the transmitter battery via USB C.
How to access the transmitter's internal memory via PC.
Step-by-step guide to enable and use mass storage mode.
How to use the transmitter as a joystick for flight simulators.
Explanation of the COM port for serial device communication.
Adjustments and considerations for the control sticks.
Steps for inserting the battery during preparation.
Instructions for charging the transmitter battery.
Explanation of the low voltage warning system and alerts.
Information on the transmitter's battery life and usage tracking.
Guidance on proper antenna positioning for optimal signal.
Steps for initial setup and commissioning of the transmitter.
How to power on the transmitter for the first time.
Guide through the initial setup wizard for basic configuration.
Explanation and selection of different control modes for models.
Configuration options for stick modes in control setups.
How to set and manage the transmitter's date and time.
Step-by-step instructions for setting the date and time.
Customizing and understanding the main display pages.
Detailed explanation of the transmitter's physical controls.
How to access and use the built-in online help.
Instructions on how to properly shut down the transmitter.
General guidance on operating the transmitter and navigating menus.
Functions and usage of the buttons located to the left of the display.
Functions and usage of the buttons located to the right of the display.
Explanation of the functions of specific additional keys.
Explanation of icons and symbols shown on the main display.
How to interact with and navigate the transmitter's touch display.
Instructions on how to change the active control mode.
Detailed steps for creating a new model.
How to select and configure the type of model.
Customizing settings specific to an individual model.
Detailed steps for renaming a model.
Detailed steps for deleting a model.
Detailed steps for selecting a model.
Process of connecting receivers to the transmitter.
Understanding and managing bind groups for receivers.
How to bind multiple receivers to the transmitter.
Customizing the order of control channels.
Automatically setting channels to a consecutive order.
Step-by-step guide for manual channel order adjustment.
How to remove existing receiver bindings.
Performing a range test to check signal strength.
Detailed steps for conducting a range test.
Reassigning transmitter outputs to different functions.
Calibrating the transmitter's control sticks.
Steps to check the current calibration of the sticks.
Detailed steps for calibrating the transmitter sticks.
Assigning and configuring control functions and inputs.
Detailed steps for assigning controls to functions.
Adjusting transmitter and mixer response curves and characteristics.
Step-by-step guide for selecting response curve characteristics.
Steps to set curve characteristics for controls.
Steps to add points to a curve.
Steps to delete points from a curve.
Visual representation of current servo positions and settings.
Overview of wireless and GPS connectivity features.
How to set up and use the transmitter's WLAN connection.
Detailed steps for configuring a WLAN connection.
Steps to remove a saved WLAN connection.
Details on connecting Bluetooth devices and using COM ports.
How to connect and use Bluetooth devices with the transmitter.
Explanation of the COM port for serial device communication.
Understanding and displaying telemetry data from receivers.
How to select the receiver for telemetry data display.
Adjusting the speed of telemetry data transmission.
Visualizing the quality of the radio frequency connection.
Accessing and viewing detailed settings and data.
Explanation of the functions of the cross-shaped keypad.
Usage of left and right selection keys for navigation.
Transferring model data between transmitters and PC.
How to exchange model data between different Graupner transmitters.
Steps to copy firmware files from the transmitter's mass storage.
Steps to download and install firmware updates.
Performing firmware updates wirelessly via WLAN.
Procedure for performing a forced firmware update if issues occur.
How to boot the transmitter into mass storage mode for recovery.
Step-by-step guide for forced mass storage mode entry.
EU declaration of conformity for the radio system type.
Details about the manufacturer and their contact information.
Guidelines for responsible disposal and recycling of the product.
Recommendations for maintaining and cleaning the transmitter.
Information regarding the product's warranty terms and conditions.
To Next Page