10 / 64
33040_mc32exHoTT_V1.00_en
11 / 64
33040_mc32exHoTT_V1.00_en
Symbol Description
Keep an eye on the information marked with this warning sign,
especially which are additionally marked with CAUTION or
WARNING. The signal word WARNING indicates possible seri-
ous injuries, another word CAUTION indicates possible minor
injuries.
Note Signal word for potential malfunction.
Attention indicates potential damages to objects.
Safety notes
These safety instructions are intended not only to protect the
product, but also to ensure your own safety as well as other peo-
ple‘s. Therefore, read this section very carefully before you use the
product!
• Do not leave the packaging material lying around, it
could become a dangerous toy for children.
• Persons, including children, who due to their physical,
sensory or mental abilities or inexperience or igno-
rance are unable to operate the transmitter safely, must
not use the transmitter without supervision or instruc-
tion from a responsible person.
• The handling and operation of radio-controlled models
needs to be learned! If you have never piloted such a
model, start out very carefully and familiarize yourself
with how the model responds to remote control com-
mands. Proceed with responsibilities.
• Protect all devices from dust, dirt and moisture. Never
expose them to vibration or excessive heat or cold.
Remote control operation may only be carried out at
„normal“ outside temperatures in range from -10 °C to
+55 °C.
• Always perform a range and function test on the ground
before you start using your model! This is the only way
to ensure safe operation!
• Always use all of your HoTT components with the latest
firmware version.
• In case of questions that cannot be clarified with the
help of the operating instructions or the context-re-
lated help text, please contact us or another specialist.
For your safety when handling the transmitter
WARNING
• While programming the transmitter, make sure that a
motor connected to the model does not start up by
accident. Disconnect the fuel supply or the drive bat-
tery beforehand.
• Never program your transmitter during normal opera-
tion of model. This can result in inattentiveness when
controlling as well as incorrect programming.
CAUTION
Avoid any kind of short circuits in all connection sockets
of the transmitter and receiver, which can result in risk of
fire! Only use the correct connectors. Do not make any
modifications to the electronic components of the trans-
mitter or receiver. Any interference will void the warranty.
Note
Protect the model and the transmitter from damage during-
transport.
For your safety when handling batteries
CAUTION
• Protect all devices from dust, dirt, moisture, heat and
vibration. Only use in dry conditions.
• Do not use any damaged battery.
• Any alterations to the battery can result in serious
injury or burns.
• Batteries may not be heated, burned, short-circuited or
charged with excessive current or reversed polarity.
• Combustible or highily inflammable objects are to be
kept away from the charging area.
• Never leave the charger unattended when it is con-
nected to the power supply.
• Please charge batteries in rooms equipped with a smoke
detector.
• Always charge batteries with suitable chargers.
• The max. quick charging current specified for the
respective cell type must not be exceeded.
To Next Page
Loading...
Need help?
General
