Need help?Do you have a question about the GRAUPNER MC-28 and is the answer not in the manual?
General| Proper use | Helicopter |
|---|---|
| Product type | Remote control |
| Product color | Black, Silver |
| Frequency band | 2.4 - 2.484 GHz |
| Menu languages | DEU, DUT, ENG, ESP, FRE, ITA |
| Channels quantity | 16 channels |
| Brand compatibility | Graupner |
| Throttle (TH) function | Yes |
| Compatible memory cards | MicroSD (TransFlash) |
| Number of memory records | 120 |
| Maximum operating distance | 3000 m |
| Operating temperature (T-T) | -15 - 55 °C |
| Power consumption (charging) | 400 mA |
| Operating voltage (max) | 4.35 V |
| Operating voltage (min) | 3.4 V |
Weight and Dimensions| Depth | 235 mm |
|---|---|
| Width | 228 mm |
| Height | 66 mm |
| Weight | 1250 g |
Specifies the permitted use of the remote-control system and warnings.
Provides specifications for the mc-28 HoTT transmitter.
General safety instructions for handling the transmitter and models.
Provides safety warnings for operating the transmitter, especially regarding motors.
Offers essential safety precautions for handling and charging the transmitter battery.
Guidelines for safely storing LiPo/LiPo batteries.
Identifies and describes the various control elements on the transmitter's exterior.
Describes the transmitter display elements and their functions.
Covers initial setup steps like checking throttle position and RF module activation.
Step-by-step guide on how to bind a receiver to the transmitter.
Step-by-step guide for updating the transmitter's firmware.
Instructions for checking and correcting the calibration of sticks and sliders.
Detailed steps for calibrating various control types: sticks, slides, levers, UVR.
Instructions for updating firmware using a memory card.
Instructions for updating the transmitter's firmware via USB.
Troubleshooting steps for when the transmitter's power switch is unresponsive.
To Next Page
