GRAUPNER MC-28 User Manual

6 / 40
33028_mc28_T1V3_sh_en
Intended use
This remote-control system may only be used for the purpose spec-
ified by the manufacturer for operation of UAVs and other unmanned
remote control models. Any other type of use is impermissible and
may damage the system and cause significant property damage and/
or personal injury. No warranty or liability is therefore offered for any
improper use not covered by these provisions.
In addition, it is explicitly pointed out that you must inform yourself
about the laws and regulations applicable at your respective starting
point before starting the remote control operation. Such conditions
may differ from state to state, but this must be followed in every
case.
Notes
• In general, it is not permitted to fly over airports, factory sites,
nature reserves, built-up areas, etc.
• Where designated no-fly zones are located, and which in no way
affect them, it can be determined, for example, using the “Air-
Map” app.
Read through this entire manual before you attempt to install or use
the transmitter.
Target group
The product is not a toy. It is not suitable for children under 14 years.
The operation of the mc-28 HoTT transmitter must be performed
by experienced modelers. If you do not have sufficient knowledge
about dealing with radio-controlled models, please contact an expe-
rienced modeler or a model club.

GRAUPNER MC-28 Specifications

General

Proper use	Helicopter
Product type	Remote control
Product color	Black, Silver
Frequency band	2.4 - 2.484 GHz
Menu languages	DEU, DUT, ENG, ESP, FRE, ITA
Channels quantity	16 channels
Brand compatibility	Graupner
Throttle (TH) function	Yes
Compatible memory cards	MicroSD (TransFlash)
Number of memory records	120
Maximum operating distance	3000 m
Operating temperature (T-T)	-15 - 55 °C
Power consumption (charging)	400 mA
Operating voltage (max)	4.35 V
Operating voltage (min)	3.4 V

Weight and Dimensions

Depth	235 mm
Width	228 mm
Height	66 mm
Weight	1250 g