17 / 40
33028_mc28_T1V3_sh_en
model memory is still nameless, the corresponding log files are
saved in a subfolder entitled "NoName".
In the folder "Models" are saved the exported model memories.
The data can be evaluated on a compatible computer using the pro-
grams found on the downloads page for the transmitter under
www.graupner.de.
Display and touchpad
Alpina 30
#11
0:51h
S
L
0:00 0
0:00.0
4.1V
0.0V
HoTT
M
<<Acro 2 >>
0,0V
2 31 5 6
9 108 12 1411
15
4 7
13
v
1 Model memories 1 … 120
2 Model name
3 Model type display
4 Micro SD card (inserted)
5 Flight chronometer in min:s (forward/reverse)
6 Log timer in min:s
7 Flight phase timer display
8 Transmitter use timer
9 Phase name
10 Transmitter battery voltage with dynamic bar indicator (if
the battery voltage underruns the 3.6 V (adjustable)
threshold a warning message will appear and an acoustic
warning will sound)
11 Signal power
12 M = Model function, P = Pupil
Near: Signal strength
13 Graphic display of the position of the four digital trimming
levers with a direction display.
14 Operating mode
15 Receiver battery voltage RX-VOLT