GRAUPNER mc-32

265
Detail program description - Entry lockout
CODE LOCK
Bitte Geheimzaccess code:
(_ )
SET3
21 3 4
Memorise access


none
Now exit the menu with a brief tap on the ESC key of
the left touch pad.
Leaving the menu without input of a secret code
To leave the menu opened out of curiosity or by
accident when no other key has been touched.
Therefore, the display appears as follows:
CODE LOCK
Desired (new) access code:
(_ )
SET
321 3 4
Tap once on the center SET key of the right touch
pad. The following display appears:
CODE LOCK
Bitte Geheimzaccess code:
(_ )
SET3
21 3 4
Memorise access


none
Now exit the menu with a brief tap on the ESC key of
the left touch pad.
Tip:
If you generally want to dispense with a programming
lock, that option should be removed from the
multifunction menu by way of »Suppress menus«.
This will prevent unauthorized persons from entering
a secret code "on the sly".