GRAUPNER mc-32

96 Detail program description - Model type | Winged models
Tail type
Motor on C1
Normal
None
Aileron/camber flaps
1 AIL
M O D E L L T Y PE
Brake Offset Input 1+90%
SEL
Tip:
Preferably, the servo intended for operating any
airbrake fl aps that may be on the model should be
connected to the receiver output operated by the
brake input channel, e.g. connect airbrake servo onto
(free) receiver output 8 if input 8 has been chosen
for the "brake", etc. A second airbrake servo is most
conveniently operated by way of a free mixer.