12
Description of radio control set
Seven switches (two three-way switches, three two-•
way switches and two momentary switches), plus
three digital controls - already installed and extremely
versatile
Unrestricted assignment of all switches to switched •
functions simply by operating the appropriate switch
Internal real-time clock for dating log files•
User-replaceable CR2032 buffer battery for internal •
real-time clock
Storage of model memories using the latest battery-•
free back-up system
Eight control functions with simplified, very conven-•
ient assignment of transmitter controls for auxiliary
functions, such as switches and proportional controls
Convenient mode selector provides simple method •
of changing the stick mode (modes 1 - 4, e. g. throttle
right / throttle left).
When you change modes, all the affected settings
are switched at the same time.
Graphical servo display provides a straightforward •
overview of the servo set-up, and a swift method of
checking servo travels
Receiver output swap•
Comprehensive programs for fixed-wing model •
aircraft and helicopters:
Fixed-wing menu for: 1 AIL, 1 AIL + 1 FLAP, 2 AIL, 2
AIL + 1 or 2 FLAP, V-tail, delta / flying wing, two ele-
vator servos
Fixed-wing mixer: diff aile, diff.flaps, ail rudd, ail
flaps, brake elev, brake flap, brake aile,
elev flap, elev aile, flap elev, flap aile
and diff. reduction
Heli menu: 1-point, 2-point, 3-point and 4-point •
linkages (1 servo, 2 servo, 3sv(2roll), 3sv(140°),
3sv(2nick (pitch-axis)), 4 SV (90°))
Swashplate limiter•
Servo travel adjustment +/- 150% for all servo out-•
puts, variable separately for each side (Single Side
Servo Throw)
Variable sub-trim, range +/- 125%, for adjusting the •
neutral position of all servos
Servo reverse, programmable for all servos•
EXPO / DUAL-RATE system, separately variable, can •
be switched in-flight, flight phase programmable
Stopwatch / count-down timer with alarm function•
Model memory copy function•
Integral DSC socket for use with flight simulators and •
Trainer systems
General features of the HoTT system
Simple, ultra-fast binding of transmitter and receiver•
Multiple receivers can be bound per model for paral-•
lel operation
Extremely fast re-binding, even at maximum range•
Two-receiver satellite operation using special cable •
connection
Range-check and warning function•
Receiver low-voltage warning on transmitter screen•
Ultra-wide receiver operating voltage range: 3.6 V to •
8.4 V (fully operational down to 2.5 V)
Fail-Safe•
Unrestricted channel assignment (channel-mapping), •
mixer functions and all servo settings programmable
in the Telemetry menu
Up to four servos can be actuated simultaneously •
as a block, with a servo cycle time of 10 ms (digital
servos only)
Optimised frequency hopping and broad channel •
spread for maximum interference rejection
Intelligent data transmission with corrective function•
Real-time telemetry analysis•
More than 200 systems can be operated simultane-•
ously
Future-proof update capability using USB port•
mx-16 Computer System
Eight-channel radio control set with Graupner|SJ HoTT 2.4 GHz technology (Hopping Telemetry Transmission)
To Next Page
Loading...
