GRAUPNER mx-16 HOTT - On-screen Warnings; On-screen Function Fields

36
Description of transmitter - On-screen warnings and function fields
Warnings
BIND N/A
OK
“Binding not present”
No receiver is bound to the
currently active model mem-
ory. A brief touch of the SET
button takes you directly to the
corresponding option.
RF ON/OFF?
OFF
ON
Do you want the RF signal to
be “ON” or “OFF?
battery
needs
charging
Battery must be charged
Operating voltage too low
fail safe
setup
t.b.d
Fail-Safe not yet set up
MISSING
IMPORT
DATA
OK
No suitable voice files found
on the memory card
throttle
too
high !
The throttle stick (or helicopter
limiter) is set too far in the
direction of full-throttle
RF
MUST BE
OFF
OK
Request to switch off the RF
section
(voice files can only be loaded
with the RF section switched
off)
CAN‘T
RECEIVE
DATA
OK
No bound receiver in range.
On-screen warnings
The bottom line of the screen displays function fields
which vary according to the menu selected.
SEL STO SYM ASY
The function fields are activated by touching the SET
button.
Function fields
SEL• select
STO• store (e. g. transmitter control position)
SYM• adjust values symmetrically
ASY• adjust values asymmetrically
• Switch symbol field
(assigning switches of all kinds)
• Switch to second page (next menu)
within a menu
On-screen function fields
SEL, STO, SYM, ASY, ,
no
student
signal
No connection between
Teacher and Pupil transmitters
SD-CARD
INSERT
OK
No SD or SDHC memory card
in the card slot, or card cannot
be read.
TRAINER
Wireless Link
INHACT
A “wireless Trainer connection” was used before the
transmitter was last switched off; do you wish that con-
nection to be continued (ACT), or switched OFF (INH)?