EN - 19
Fuel Control Lever
Controls fuel flow from
the left or right fuel tank
or stops fuel flow to the
engine.
Move the lever to the left
or right tank position to
operate the engine. Move the valve to the Off
position when storing or transporting the unit.
Parking Brake Lever
Engages and disengages
parking brake.
Push lever forward to
disengage (1) parking
brake.
Pull lever backward to
engage (2) parking brake.
SEAT ADJUSTMENTS
Height/Pressure Adjustment Knob
Unit is equipped with an adjustable air-
cushion seat which allows adjusting seat
height and operator comfort.
(Figure 7)
To adjust seat height:
1. While seated move ignition key to the
On position.
2. Push seat height-pressure adjustment
knob (item 1) inward to inflate air
cushion and increase seat height.
3. Pull seat height/pressure adjustment
knob outward to release air from cushion
and lower seat height.
Arm Rest Angle
(Figure 8)
To adjust seat forward or backward:
1. While seated, pull seat adjustment lever
(item 2) outward and slide seat into
desired position.
Figure 6
1. Mower Lift Pedal
2. Height of Cut (HOC) Index Wheel
3. Transport Lock Lever
4. HOC Setting Indicator
1
2
3
2
Off
Position
3
4
WARNING: Make all seat
adjustments with unit stationary,
parking brake engaged and
engine shut off.
WARNING: Make all seat
adjustments with unit stationary,
parking brake engaged and
engine shut off.
Figure 7
1. Height/Pressure Adjustment Knob
2. Seat Adjustment Lever
1
2