Gravely Pro-Walk Gear 32GR User Manual

EN - 3
4. Notice
NOTICE: Indicates information or procedures
that are considered important but not hazard
related. If not followed, property damage
could result.
5. Important
IMPORTANT: Indicates general reference
information worthy of special attention.
SAFETY DECALS LOCATIONS
The safety decals on your machine are visual
reminders of the important safety information
found in this manual. All messages found on
your unit must be fully understood and
carefully followed. Safety decals found on the
machine are explained below.
Safety Decals Locations
Always replace missing or damaged safety
decals. Replacement decals can be found in
the parts manual for your machine and
ordered from your dealer. See Figure 2 for
safety decal locations.
MAX. FILL
1
3
5
2
4
Figure 2

Gravely Pro-Walk Gear 32GR Specifications

General

Cutting Width	32 inches
Engine	Kawasaki FS481V
Engine Displacement	603 cc
Engine Power	14.5 HP
Cutting Height	1.5 - 4.5 inches
Deck Material	Steel
Wheel Size	20 inches (rear)