Gravely ZT2044 User Manual (English)

Questions and Answers:

P
Patricia PattersonAug 13, 2025
How to troubleshoot starting issues with my Gravely Lawn Mower?
- J
  jeffrey62Aug 13, 2025
  If your Gravely Lawn Mower engine won't crank or start, several factors could be at play. First, ensure the safety interlock system is properly engaged and not faulty. Next, check that the fuel tanks are adequately filled and the fuel shut-off valve is open. A discharged battery or poor connection between the battery and cables can also prevent starting, so charge the battery and tighten/clean the connections as needed. Lastly, inspect the spark plug wires for looseness and the spark plugs themselves for faults, replacing if necessary.
D
Daniel HutchinsonAug 16, 2025
Why won't my Gravely ZT2044 move when using the steering levers?
- N
  Nancy CrawfordAug 16, 2025
  If your Gravely Lawn Mower does not move with the engine running when using the steering levers, the transmission bypass lever may be engaged. Disengage the transmission bypass lever. Also, a faulty hydrostatic belt could be the issue. Replace the hydrostatic belt.
F
Francis LopezAug 20, 2025
What to do if PTO or mower blades do not engage on Gravely ZT2044 Lawn Mower?
- C
  Carolyn GarciaAug 20, 2025
  If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, it could be due to several reasons. Make sure the operator presence switch is depressed by sitting on the seat. Also, check if the electric clutch connector is loose or disconnected, and connect it if necessary. Finally, a faulty PTO belt could be the culprit, so consider replacing it.
M
Michele BryantAug 25, 2025
Why is my Gravely Lawn Mower engine running rough?
- P
  Phillip BoydAug 25, 2025
  If your Gravely Lawn Mower engine runs rough, the choke might be engaged, so disengage it. Also, the air filter cartridge could be plugged. In this case, clean or replace the air filter cartridge.
K
Kevin RayAug 27, 2025
How to fix a Gravely ZT2044 Lawn Mower that does not travel in a straight line?
- S
  ssmithAug 27, 2025
  If your Gravely Lawn Mower is not traveling in a straight line, start by checking the tire pressure. If the pressure is not correct, adjust it. If that doesn't solve the issue, the steering levers may need adjustment.
D
Duane JimenezAug 31, 2025
What causes a Gravely ZT2044 engine to overheat?
- J
  Jeremy PetersonAug 31, 2025
  If your Gravely Lawn Mower engine overheats, it may be due to a low engine oil level, so add engine oil. Another potential cause is a plugged cooling system, so clean the cooling system.
C
cmoralesSep 3, 2025
How to improve cutting quality of Gravely ZT2044?
- J
  Julie ChungSep 4, 2025
  If you observe poor cutting quality with your Gravely Lawn Mower, the mower deck may not be level or the mower pitch is incorrect. Level and adjust the pitch of the mower deck. The mower blades may also be dull or faulty, so sharpen or replace them.
O
owilliamsSep 7, 2025
Why does the hour meter continue to run on my Gravely Lawn Mower when the engine is off?
- A
  alexanderglennSep 7, 2025
  If the hour meter on your Gravely Lawn Mower continues to run when the engine is not running, the ignition key is likely in the run position with the engine turned off. Turn the ignition key to the off position.

Gravely ZT2044 Specifications

General

Cutting Width	44 inches
Transmission	Hydrostatic
Fuel Capacity	3.5 gallons
Deck Type	Fabricated
Speed	Up to 7 mph
Turning Radius	Zero-turn

Summary

SAFETY

SAFETY ALERTS

Explains safety alert symbols and their meaning.

NOTATIONS

Defines different types of notes used in the manual.

SAFETY DECALS AND LOCATIONS

Identifies safety decals and their placement.

DANGER AND WARNING MESSAGES

Details specific hazard warnings and precautions from decals.

SAFETY RULES

Lists essential safety rules for operation and maintenance.

ASSEMBLY

PRE-OPERATION SETUP

Covers unpacking, battery connection, and initial component checks.

OPERATIONAL CHECKS AND ADJUSTMENTS

Includes seat, deck leveling, fuel, and control system checks.

CONTROLS AND FEATURES

PRIMARY OPERATOR CONTROLS

Details ignition, throttle, steering, and parking brake controls.

MOWER AND ACCESSORY CONTROLS

Covers mower lift, axle locks, and fuel tank operations.

OPERATIONAL MODES

Explains emergency stop and manual unit movement procedures.

OPERATION

SAFETY INTERLOCK SYSTEM TESTING

Procedures to verify the proper function of safety interlocks.

STARTING AND SHUTTING OFF ENGINE

Step-by-step guide for engine management and shutdown.

OPERATING THE MOWER

How to use the mower for cutting grass and general operation.

TRANSPORTING THE UNIT

Guidelines for safely transporting the mower on a vehicle.

BEST PERFORMANCE PRACTICES

Tips for optimal mowing results and unit maintenance.

MAINTENANCE SCHEDULE

REGULAR MAINTENANCE TASKS

Lists tasks for daily/weekly checks and cleaning.

PERIODIC MAINTENANCE

Details tasks based on operating hours or seasonal intervals.

SERVICE AND ADJUSTMENTS

TIPPING SEAT FORWARD

Procedure to access components by tilting the operator's seat.

OPENING AND CLOSING HOOD

Instructions for opening and closing the engine compartment hood.

LEVELLING AND ADJUSTING PITCH OF MOWER DECK

LEVEL MOWER DECK

Steps to ensure the mower deck is horizontally level.

ADJUST PITCH OF MOWER DECK

Procedure to set the front-to-back angle of the mower deck.

REMOVING MOWER DECK

Instructions for detaching the mower deck assembly.

OPENING DECK ACCESS PLATE

How to open the deck's access plate for service.

REPLACING MOWER BLADE

SHARPENING MOWER BLADE

Guide to sharpening mower blades for optimal cutting.

ADJUSTING ANTI-SCALP ROLLER

How to adjust anti-scalp rollers to prevent deck damage.

SERVING BATTERY

BATTERY REMOVAL AND INSTALLATION

Steps for safely handling and replacing the battery.

CLEANING BATTERY AND CABLES

Procedure for cleaning battery terminals and cables.

ADJUSTING STEERING LEVERS

ADJUSTING STEERING LEVER HEIGHT

How to adjust the height of the steering levers for comfort.

FORWARD AND REVERSE SPEED ADJUSTMENT

Adjusting steering lever travel for straight unit tracking.

REPLACING PTO BELT

REMOVING PTO BELT

Steps to remove the Power Take-Off (PTO) belt.

INSTALLING PTO BELT

Steps to install the Power Take-Off (PTO) belt.

REPLACING HYDROSTATIC BELT

REMOVING HYDROSTATIC BELT

Steps to remove the hydrostatic drive belt.

INSTALLING HYDROSTATIC BELT

Steps to install the hydrostatic drive belt.

STORAGE

SHORT TERM STORAGE

Guidelines for storing the unit for brief periods.

LONG TERM STORAGE

Procedures for storing the unit for extended durations.

TROUBLESHOOTING

ENGINE STARTING AND PERFORMANCE

Addresses issues with starting, rough running, and overheating.

DRIVE AND CONTROL PROBLEMS

Solves problems with movement, PTO engagement, and steering.

CUTTING AND TRACKING ISSUES

Fixes poor cutting quality and unit tracking problems.

SERVICE PARTS

ACCESSORIES

SPECIFICATIONS

LIMITED WARRANTIES

CONSUMER AND COMMERCIAL WARRANTIES

Details 2-year warranties for lawn and garden products.

SNO-THRO AND AUGER WARRANTIES

Covers specific product warranties for snow blowers and augers.

WARRANTY EXCEPTIONS AND LIMITATIONS

Outlines exclusions, conditions, and limitations of the warranties.

Related product manuals

Gravely 915038 - ZT2048

Gravely 915040 - ZT2252

Gravely ZT2044 User Manual

Table of Contents

Questions and Answers:

Gravely ZT2044 Specifications

Summary

SAFETY

SAFETY ALERTS

NOTATIONS

SAFETY DECALS AND LOCATIONS

DANGER AND WARNING MESSAGES

SAFETY RULES

ASSEMBLY

PRE-OPERATION SETUP

OPERATIONAL CHECKS AND ADJUSTMENTS

CONTROLS AND FEATURES

PRIMARY OPERATOR CONTROLS

MOWER AND ACCESSORY CONTROLS

OPERATIONAL MODES

OPERATION

SAFETY INTERLOCK SYSTEM TESTING

STARTING AND SHUTTING OFF ENGINE

OPERATING THE MOWER

TRANSPORTING THE UNIT

BEST PERFORMANCE PRACTICES

MAINTENANCE SCHEDULE

REGULAR MAINTENANCE TASKS

PERIODIC MAINTENANCE

SERVICE AND ADJUSTMENTS

TIPPING SEAT FORWARD

OPENING AND CLOSING HOOD

LEVELLING AND ADJUSTING PITCH OF MOWER DECK

LEVEL MOWER DECK

ADJUST PITCH OF MOWER DECK

REMOVING MOWER DECK

OPENING DECK ACCESS PLATE

REPLACING MOWER BLADE

SHARPENING MOWER BLADE

ADJUSTING ANTI-SCALP ROLLER

SERVING BATTERY

BATTERY REMOVAL AND INSTALLATION

CLEANING BATTERY AND CABLES

ADJUSTING STEERING LEVERS

ADJUSTING STEERING LEVER HEIGHT

FORWARD AND REVERSE SPEED ADJUSTMENT

REPLACING PTO BELT

REMOVING PTO BELT

INSTALLING PTO BELT

REPLACING HYDROSTATIC BELT

REMOVING HYDROSTATIC BELT

INSTALLING HYDROSTATIC BELT

STORAGE

SHORT TERM STORAGE

LONG TERM STORAGE

TROUBLESHOOTING

ENGINE STARTING AND PERFORMANCE

DRIVE AND CONTROL PROBLEMS

CUTTING AND TRACKING ISSUES

SERVICE PARTS

ACCESSORIES

SPECIFICATIONS

LIMITED WARRANTIES

CONSUMER AND COMMERCIAL WARRANTIES

SNO-THRO AND AUGER WARRANTIES

WARRANTY EXCEPTIONS AND LIMITATIONS

Related product manuals