25
Assigning a Text Tag to a Group ID
1. Press PGM.
2. Press TRUNK.
3. Press FUNC then or to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down or to select the desired group ID.
6. Press TEXT then enter the tag using the keypad. (See “Text Input Chart”).
7. Press ENT to store.
Assigning a Text Tag to a Bank
1. Press PGM.
2. Press FUNC then press bank number. Bank X (0 through 9) selected.
Fn+CLR to delete all frequencies, TEXT to edit tag appears.
3. Press TEXT, then enter the text using the keypad.
4. Press ENT to store.
Text Input Chart
Notes:
• To access the numbers, after you press TEXT (when you assign the text tag
to a channel) or you press FUNC and bank number (when you assign the
text tag to a bank), press 1. Then press the desired number you want to
enter.
• To enter lowercase character or a character from the second set for the key
0, press FUNC after pressing the first numeral key.
PRESSED CHARACTERS PRESSED CHARACTERS
1 0123456789 7 P Q R S
2 A B C 7 then FUNC p q r s
2 then FUNC a b c 8 T U V
3 D E F 8 then FUNC t u v
3 then FUNC d e f 9 W X Y Z
4 G H I 9 then FUNC w x y z
4 then FUNC g h i 0 . - # _ @ + * & / ,
5 J K L 0 then FUNC $ % ! ^ ( ) ? ~ '
5 then FUNC j k l ./DELAY Space
6 M N O CL Back Space
6 then FUNC m n o
To Next Page
Loading...