E-Smart Zone Controller
18
Fig. 3.6 Setting Page of Indoor Unit
Press button to select the required indoor unit that needs to be set.
（
1
）
Name: number or letter can be input(it should not be over 15 letters).
（
2
）
Icon: press to select the preset icon.
（
3
）
Engineering No.: it can be set in 1-255.
（
4
）
Press Save button to successfully save the setting. Then the indoor unit list
on the home page will display the new name and icon of indoor units.
3.6 Operation Notice
Press Setting on the homepage to enter the setting page.
Press to enter help page and then press
“ ”
button
to switch to operation notice.
On the page of operation notice, user can view the information of the local unit,
customer service information, operation instructions and other notices.
To Next Page
Loading...
