Gree D Series - Temperature Monitoring

D Series Modular Air-cooled Scroll Chillers
21
y
Temperature View
The function is for checking temperature at various temperature points. Select
Temp. View
and press
the
Conrm
button to go to the pages as shown in the following drawings.
C Water Tin XXX.X℃
C Water Tout XXX.X℃
H Water Tin XXX.X℃
H Water Tout XXX.X℃
Page 1
Page 2
Suction T1 XXX.X℃
Suction T2 XXX.X℃
Exhaust T1 XXX.X℃
Exhaust T2 XXX.X℃
▲
Page 3
Throttle T1 XXX.X℃
Throttle T2 XXX.X℃
▲
Page 4
Press the
Up or Down
selection button to convert among the above four pages. Press the Exit button to
quit the menu page and go back to the previous menu.
When
page 1
is present on the screen, press the
Reset
button and the
Exit
button simultaneously for 3
seconds, and
C Water Tin
and H Water Tin, as displayed previously, will be converted to
C AVER.Tin
and
H AVER.Tin
. And press again the
Reset
button and the Exit button simultaneously for 3 seconds, and
C
Water Tin
and
H Water Tin
will be displayed again. As such, display can be converted between water inlet
temperature and water inlet average temperature.
NOTE
•
Above temperature display is dependent on unit model. If the temperature sensor is not existent for a
certain model, “NA” would be present on the display zone for corresponding temperature point.