Gree FLEXX60HP230V1BH User Manual

Thank you for choosing our product.
Please read this Owner’s Manual carefully before operation and
retain it for future reference.
If you have lost the Owner's Manual, please contact your local
distributor or visit www.greecomcomfort.com/resources for the
electronic version.
Change for life
Installation & Owner's Manual
Original Instructions
Air Conditioners
Air Handlers
Models:
FLEXX24HP230V1BH
FLEXX36HP230V1BH
FLEXX48HP230V1BH
FLEXX60HP230V1BH

Gree FLEXX60HP230V1BH Specifications

General

Model	FLEXX60HP230V1BH
Type	Heat Pump
Cooling Capacity	60, 000 BTU/h
Heating Capacity	60, 000 BTU/h
Voltage	230V
Refrigerant	R410A
Compressor Type	Inverter
Efficiency Rating (SEER)	17
Phase	1
Voltage (V)	230V
Power Supply	60 Hz

Summary

Safety Precautions

General Warnings and Safety Signals

Discusses installation hazards, safety symbols, and signal words like DANGER, WARNING, CAUTION.

Electrical Shock Hazard and Precautions

Details electrical shock risks during installation and servicing, emphasizes disabling power.

Grounding and Power Supply Safety

Covers essential grounding requirements and correct power supply usage for safety.

Carbon Monoxide Poisoning Hazard

Warns about CO poisoning risks in enclosed spaces with combustion devices.

Preparative for Installation

Pre-Installation Instructions and Checks

Installation Safety Instructions and Labels

Emphasizes recognizing and following safety symbols, words, and labels for hazard prevention.

Installation Procedures

Unit Inspection and Model Verification

Location Guidelines and Clearance Requirements

Piping Work and Connection Specifications

Details connection pipe specifications, solder, and screw connection methods.

Condensate Removal System Setup

Ductwork Installation and Sealing

Electrical Installation Requirements and Notices

Covers wiring, power cords, thermostat connection, and electrical safety guidelines.

Electrical Parameters and Safety Notices

Power Cord and Thermostat Wiring Methods

Wiring Diagrams and Connections

Wire Management and Electrical Safety Warnings

Installation Check and Trial Run

Post-Installation Checks

Lists essential checks for reliable installation before powering on the unit.

Trial Run Procedures

Guides on preparing for and conducting the trial run to ensure proper operation.

Common Malfunction and Elimination

Unit Activation and Operation Issues

Cooling and Heating Performance Problems

Other Operational Malfunctions and Causes