To Next PageTo Next Page
Need help?Do you have a question about the Gree FLEXX60HP230V1AO and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | FLEXX60HP230V1AO |
| Heating Capacity | 60, 000 BTU |
| Cooling Capacity | 60, 000 BTU |
| Voltage | 230V |
| SEER Rating | 18 |
| HSPF Rating | 9.5 |
| Refrigerant | R-410A |
| Phase | 1 |
Explains safety alert symbols and signal words used in the manual and on the unit.
Covers critical warnings regarding electrical shock, proper storage, and installation compliance.
Details warnings for installation, operation, and maintenance to prevent hazards.
Offers important notices on safe operation and placement restrictions.
Specifies the operational temperature limits for cooling and heating modes.
Lists the standard accessories provided with the outdoor unit for installation and connection.
Lists optional accessories available for enhancing unit functionality or connection.
Guides on selecting an appropriate installation location and understanding unit dimensions and spacing requirements.
Details the procedures for securely installing the outdoor unit and setting up drainage.
Explains methods for connecting refrigerant pipes, including flaring, bending, and brazing.
Outlines critical steps for vacuum pumping the system and detecting refrigerant leaks.
Provides guidance on the amount of refrigerant to add based on pipe length and model.
Details the installation of the condensate drain pipe for the outdoor unit.
Specifies requirements for safe and compliant electrical installation, including wiring and power connections.
Details electrical specifications, connection procedures for power/thermostat wires, and wiring diagrams.
Lists essential checks to perform after installation to ensure proper functioning and safety.
Guides on preparing for and conducting the initial test run of the installed unit.
Provides solutions for common operational problems and non-failure situations.
Lists and explains error codes displayed by the unit for diagnosing faults.
Details routine maintenance tasks, seasonal checks, and component replacement guidelines.
Provides essential information and guidelines for servicing, including safety and refrigerant management.
Information on contacting Gree for after-sales support and addressing issues.
