Gree GDN12AJ-K4EBC1A - Page 23

21
Maintenance
Service Manual
Steps Procedure
4
5
Remove rear case
Loosen 2 clasps on the lter and then remove
the lter. Remove 6 connection screws xing
rear case. Remove 2 wire clamps and then
remove rear case.
Remove top cover
Remove connection screws xing top cover
(6 screws on the side, 5 screws on the front
face). Lift the top cover to remove it.
a. Remove side plates
Remove connection screws fixing side
plates
(2 screws on each side). Then remove the
right and left side plates.
b. Remove display panel
Remove 6 connection screws xing display
panel. Then remove display panel.
screws
top cover
display panel
right side plate
left side plate
screws
screws
screws
wire
clamps
lter
rear case