Gree GDN12AJ-K4EBC1A - Page 24

22
Maintenance
Service Manual
Steps Procedure
6 Remove air duct
Remove 2 connection screws between air
duct and water tray. Lift the air duct up to
remove it.
a. Remove cover plate ( air duct)
Remove 2 connection screws and then
remove the cover plate.
b. Remove ow guide loop
Remove 4 connections screws and then
remove the ow guide loop.
c. Remove centrifugal fan blade
Remove nut xing centrifugal fan blade.
Then remove the fan blade.(as shown in
g3).
d. Remove motor
Remove 3 connection screws and then
remove motor (as shown in g 4).
screws
screws
g.1
screws
nut
centrifugal
fan blade
ow guide loop
g.2 g.3
screws
fan motor
g.4