GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
310
The following window is shown. Click ―OK‖ to restart the PC.
Step 2: Enable BAS Manager.
There are two methods to enable BAS Manager.
Method 1
①Right click the BAS Manager icon in the status bar at the lower right corner on the desktop and choose
―Open‖.
②In the displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.
Method 2
Choose ―Start‖ -> ―All Programs‖ -> ―Gree CAC Remote Monitoring System‖ -> ―ServiceManager‖. In the
displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.
To Next Page
Loading...
