Multi Variable Air Conditioners Ducted Type Indoor Unit
2
2 Product Introduction
2.1 Names of Key Components
Fig.2.1.1
2.2 Rated Working Condition
-
Dry Bulb Temp
℃
(
℉
) Wet Bulb Temp
℃
(
℉
) Dry Bulb Temp
℃
(
℉
)
Wet Bulb Temp
℃
(
℉
)
3 Preparations for Installation
Product graphics are only for reference. Please refer to actual products.
Unspecified measure unit is mm (inch).
3.1 Standard Fittings
Please use the supplied standard fittings listed below as instructed.
No. Name Appearance Q'ty Usage
1 Wired Controller
1 To control the indoor unit
2 Drain Hose Assembly
1 To connect with the hard PVC drain pipe
3 Special Nut
2
GMV-ND07~15PHS/B-T(U)
1
GMV-ND18~54PHS/B-T(U)
GMV-ND72~96PH/B-T(U)
4 Corrugated pipe
1
GMV-ND18~54PHS/B-T(U)
5 M10×8 Nut with Washer
4
To be used together with the hanger bolt for
installing the unit
6 M10 Nut (M10×8.4 Nut)
4
To be used together with the hanger bolt for
installing the unit
7
M10 Washer (Spring Washer
M10×2.6)
4
To be used together with the hanger bolt for
installing the unit