To Next PageTo Next PageWhy Gree GMV-ND125T/A-T shows freeze prevention protection?
If your Gree Air Conditioner is showing freeze prevention protection, ensure that the unit is not exposed to extreme cold, as this could trigger the protection mechanism.
What to do if the power supply of wired controller is faulted in my Gree Air Conditioner?
If the wired controller of your Gree Air Conditioner is not getting power, inspect the power supply connections to ensure they are properly connected.
General| Brand | Gree |
|---|---|
| Model | GMV-ND125T/A-T |
| Category | Air Conditioner |
| Language | English |
Identifies the main parts of the indoor unit, including air outlet, filter, and fittings.
Details the nominal indoor and outdoor operating temperature and humidity conditions.
Lists available functions and compatibility with different controllers for the unit.
Lists and describes the provided accessories required for unit installation.
Provides guidelines for choosing the optimal and safe location for unit installation.
Specifies the types and lengths of communication wires for connecting units.
Details specifications for power cord size and air switch capacity.
Covers ceiling opening dimensions, suspension bolt positions, and unit suspension.
Explains the procedure for connecting refrigerant pipes, including torque specifications.
Guides on installing the drainage pipe and performing system tests to prevent leaks.
Describes how to detach, hang, and secure the decorative panel to the unit body.
Advises to contact a dealer for wired controller installation and refer to its manual.
Details how to strip wires and connect them securely to terminal boards.
Emphasizes unified power supply for all indoor units for simultaneous ON/OFF.
Explains connecting communication wires to specific terminals (D1, D2) on the unit.
Guides on connecting communication wires to terminals (H1, H2) for the wired controller.
Provides instructions for removing, cleaning, and drying the air filters.
Lists checks for air inlet/outlet, grounding, and power/communication connections.
Recommends running in fan mode to dry the unit and disconnecting power when unused.
