Gree GMV-ND140ZD/A-T User Manual (English)

Other manuals for Gree GMV-ND140ZD/A-T

Questions and Answers:

K
Kevin BurgessAug 20, 2025
Why is my Gree GMV-ND140ZD/A-T Air Conditioner having a poor cooling effect?
- J
  Jodi SalazarAug 20, 2025
  If your Gree Air Conditioner isn't cooling well, several factors could be at play. Check if the filter is dirty or blocked, and ensure that the room isn't overloaded with heat sources such as too many people. Make sure all doors and windows are closed, and that the inlet and outlet of the indoor unit are not blocked. Also, verify that the set temperature isn't too high and that there are no refrigerant leaks. Finally, the room temperature sensor may be malfunctioning.
B
Becky MartinAug 22, 2025
Why my Gree GMV-ND140ZD/A-T can't start up?
- R
  Robert ClarkAug 22, 2025
  If your Gree Air Conditioner won't start, check if the power supply is properly connected. Also, the circuit breaker might be tripping due to an electricity leak. Ensure that the input voltage is not too low and that the operation button is activated. An abnormal control loop could also prevent the unit from starting.
D
Dean JohnsonAug 25, 2025
How to improve the cooling effect of my Gree GMV-ND140ZD/A-T?
- P
  Peter CookAug 25, 2025
  To improve the cooling effect of your Gree Air Conditioner, try the following: * Clean the filter. * Reduce the heat load of the room. * Close any doors or windows. * Unblock the inlet and outlet of the indoor unit. * Lower the setting temperature. * Check the performance of the room temperature sensor.
N
Nancy McguireAug 26, 2025
How to improve the heating effect of my Gree Air Conditioner?
- B
  Brenda HallAug 26, 2025
  To improve the heating effect of your Gree Air Conditioner, consider the following: 1. Clean the filter. 2. Close the door or window. 3. Increase the setting temperature. 4. Check for refrigerant leakage. 5. Check if the outdoor ambient temperature is lower than -5°C. 6. Check for abnormality of the control circuit.
B
Brent ColeAug 27, 2025
Why is my Gree GMV-ND140ZD/A-T Air Conditioner having a poor heating effect?
- J
  jnavarroAug 27, 2025
  If your Gree Air Conditioner isn't heating effectively, start by checking if the filter is dirty or blocked. Ensure that all doors and windows are closed to prevent heat loss. Verify that the set temperature isn't too low and that there are no refrigerant leaks. Be aware that the unit's performance may be affected if the outdoor temperature is below -5 degrees. Finally, there might be an abnormality in the control circuit.
L
Lauren ArmstrongAug 29, 2025
How to fix mode shock in Gree GMV-ND140ZD/A-T?
- J
  Jason HallAug 29, 2025
  If your Gree Air Conditioner is experiencing mode shock, try resetting the unit to eliminate the mode shock.
K
kelly35Aug 31, 2025
What to do if my Gree GMV-ND140ZD/A-T stops after running for a while?
- B
  bridgeskurtAug 31, 2025
  If your Gree Air Conditioner stops after running for a while, there might be an obstacle in front of the condenser. Another possibility is an abnormal control loop. Also, setting the unit in cooling mode when the outdoor temperature is above 43 degrees may cause it to stop.
B
Bianca HowardSep 2, 2025
What to do if the indoor fan doesn’t start up during heating in my Gree Air Conditioner?
- T
  Thomas RichardsSep 2, 2025
  If the indoor fan of your Gree Air Conditioner doesn’t start during heating, the tube temperature sensor head's placement may not be suitable, or it might not be inserted well. Check if the wiring of the tube temperature sensor head is broken, or if the capacitor is leaking electricity.
D
danielsnowSep 4, 2025
What to do if my Gree GMV-ND140ZD/A-T shows a communication malfunction?
- L
  Lindsey MccarthySep 4, 2025
  If your Gree Air Conditioner displays a communication malfunction, the first step is to check the communication wiring to ensure it is properly connected.
A
Adam CarsonSep 6, 2025
What to do if Gree GMV-ND140ZD/A-T shows water overflow protection?
- R
  Ryan WeberSep 6, 2025
  If your Gree Air Conditioner is experiencing water overflow protection, examine the water drainage system for any blockages that may be causing the issue.