80DWFK6HULHV'&
,QYHUWHU6HUYLFH0DQXDO
158
4.2.3 Floor Ceiling Type
Model: GTH09K3CI/GTH12K3CI/GTH18K3CI/GTH24K3CI/GTH30K3CI/GTH36K3CI/GTH42K3CI
Remove panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
'RQRWSXW¿OWHUVFUHHQQHDUWKHKLJKWHPSHUDWXUHKHDWVRXUFH
Step Illustration Handling Instruction
Remove sub-
assy of front
grill
Move down the clip of
the sub-assy of fromt
grill until the front grill
is open. (As is shown
in the graph, arrow
represents the position
of bottons. There are
two clips for each
grating.)
5HPRYHULJKWDQGOHIW¿QLVKLQJSODWHV
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do
not scratch the outer parts.
Step Illustration Handling Instruction
Remove
right and left
¿QLVKLQJSODWHV
Ɣ5HPRYHWKHVFUHZV
as shown in the graph
with screwdriver and
then push upward to
remove the right and
left finishing plates.(As
is shown in the graph,
arrow represents the
position of screws.)
Remove
right and left
¿QLVKLQJSODWHV
Ɣ5HPRYHWKHVFUHZV
as shown in the graph
with screwdriver and
then push upward to
remove the right and
left finishing plates.(As
is shown in the graph,
arrow represents the
position of screws.)