Gree GWC

33
Technical Information
Service Manual
6. Function and Control
TURBO
FAN
MODE
ON/OFF
I FEEL T-ON T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
TURBO
FAN
MODE
ON/OFF
I FEEL T-ON T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Introduction for icons on display screen
Set temperature
WiFi function
Sleep mode
Health mode
Scavenging function
8℃ heating function
Power limiting operation
X-FAN function
Left & right swing
Up & down swing
Child lock
Quiet
Set temp.
Outdoor ambient
temp.
temp.
Clock
Indoor ambient
Operation mode
Set time
TIMER ON / TIMER OFF
Turbo mode
Send signal
Auto mode
Cool mode
Temp.
Dry mode
Fan mode
Heat mode
I feel
Set fan speed
display type
NOTE:
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which the
model doesn't have, if press the corresponding button on the
remote controller, the unit will keep the original running status.
● After putting through the power, the air conditioner will give out
a sound. Power indicator "
" is ON. After that, you can operate
the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon "
" on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signa has been sent to the air conditioner.
● As for the models with functions of WiFi or wired controller,
the indoor unit must has been controlled by standard remote
controller under auto mode first, and then the function of
adjustable temperature under auto mode can be realized by APP
or the wired controller.
● This remote controller can adjust the temperature under auto
mode. When matching with the unit which is without the function
of adjustable temperature under auto mode, the set temperature
under auto mode may be invalid, or the displayed set temperature
on the unit is not same as that on the remote controller under
auto mode.
1. ON/OFF button
Press this button to turn on the unit. Press this button again to
turn off the unit.
2. MODE button
Press this button to select your required operation mode.
AUTO COOL DRY FAN HEAT
● When selecting auto mode, air conditioner will operate
automatically according to ex-factory setting. Press "FAN" button
can adjust fan speed. Press "
" / " " button can adjust fan
6.1 Remote Controller Introduction
Buttons on remote controller for YAP1FB2F (WiFi)
With backlit display