120
Installation and Maintenance
Service Manual
Step Procedure
10. Remove 4-way valve assy
Unsolder the welding joints connecting the 4-way valve
assy, remove the 4-way valve.
Note:
Before unsoldering the welding joint, wrap the 4-way
valve with a wet cloth completely to avoid damage to
the valve caused by high temperature.
11. Remove electric expansion valve sub-Assy
Unsolder the spot weld of electric expansion valve sub-
Assy and condenser, and then remove the electric
expansion valve sub-Assy.
Note:
When unsoldering the spot weld, wrap the electric
expansion valve sub-Assy with wet cloth completely to
avoid damaging the valve due to high temperature.
12. Remove clapboard assy
Remove the screws xing the clapboard assy and then
remove the clapboard assy.
4-way valve assy
Electric expansion
valve sub-Assy
Electric expand
valve tting
Clapboard assy
To Next Page
Loading...
