Removal Procedure
90
Steps Procedure
16. Remove middle isolation sheet
Remove the screws connecting the middle
isolation sheet with the chassis assy and the
condenser assy, and then remove the middle
isolation sheet.
17. Remove compressor
Remove the 3 foot nuts fixing the compressor
and then remove the compressor.
18. Remove condenser assy
Remove the screws fixing the condenser
support and then remove the condenser
support.
Remove the screws connecting the condenser
support and the chassis assy, and then remove
the condenser assy.
middle isolation sheet
compressor
condenser assy
support
To Next Page
Loading...
