14
Condensing Unit
Service Manual
CONTROL
When the wireless remote controller sends out signal, a mark will icker for about 1s. The bell will ring if
the main unit receives effective signal.
3.2 Wired Controller (Chosen Accessory Part)
3.2.1 Display View
Fig.3.2.1 Outline of wired controller
3.2.2 Operation View
Fig.3.2.2 Instruction to Function of Buttons
No. Description Function of Button
1 Enter/cancel Function selection and canceling;
2 ▲
①
Running temperature setting of indoor unit, range :16~30°C.
②
Timer setting, range:0.5-24hr
③
Switchover between quiet/auto quiet
6 ▼
3 Fan Setting of high/middle/low/auto fan speed
4 Mode Setting of cooling/heating/fan/dry mode of indoor unit
5 Function Switch over among these functions of air/sleep/turbo/save/e-heater/blow /quiet
To Next Page
Loading...
