Gree MG30-24/D1(B)

BACnet Gateway Kit for Central Air Conditioners
2
Parameters of the Supported Air Conditioning Units
AC Type Parameters Name
GMV Indoor Units
(Note: “Remote temp/mode/On/Off shield mark”
indicates the parameter of “temp/mode/On/Off”
is disabled to be set through the unit controller
but the remote monitoring system; while “Remote
lock mark” indicates all parameter are disabled to
be set through the unit controller but the remote
monitoring system.)
Indoor unit general error mark
Indoor unit error code
Indoor unit environment Temp
Indoor unit Temp(setting)
Indoor unit mode(status)
Indoor unit mode(setting)
On/Off(status)
On/Off(setting)
Fan Speed(status)
Fan Speed(setting)
Swing(setting)
Energy saving(setting)
Remote temp shield mark(setting)
Remote mode shield mark(setting)
Remote On/Off shield mark(setting)
Remote lock mark(all shield)(setting)
GMV Outdoor Units
Outdoor unit general error mark
Outdoor unit error code
Outdoor environment temp
Complete machine compressor state
GMV Water Heater
Specic error mark for the GMV Water Heater
Specic error codes for the GMV Water Heater
Water tank temp(status)
Water tank temp(setting)
Water tank(status)
Water tank(setting)
Water tank mode(status)
Water tank mode(setting)
Double-Tube supply Water Temp
Floor Heating supply Water Setting Temp
Disinfecting
Floor heat power
Water tank control shielding code(setting)