Gree MG30-24/D1(B)

BACnet Gateway Kit for Central Air Conditioners
6
2�3 Installation Drawing
See the following drawing for the installation of each module of the BACnet Gateway MG30-24/
D1(B)
① .
Install the Web server PCD3.R600 at slot0.
② .
Install the battery module at the battery module special slot.
③ .
Install the BACnet module PCD7.R560 at M1
④ .
Standard RJ45 interface, 10M/100M self-adaptive to the Ethernet, linked to the BAS
through the communication line.
⑤ .
+24VDC GND, used to connect the power cord.
1
2
3
4
5
Fig.2-3 Installation Drawing of Each Module of the BACnet Gateway MG30-24/D1(B)
Note: See the following drawing for how to install the SD card into the Web server module PCD3.
R600�
1
Fig.2-4 Installation of the SD Card into the Web Server Module PCD3.R600