122
Disassembly of Outdoor Unit
42,000 btuh Warning - Wait 10 minutes aer power is disconnected before starting disassembly.
Disassembly of the compressor
1. Disconnect wires
Remove the wires from the compressor, noting the colors and
locations of each wire.
2. Disassemble piping
Reclaim all refrigerant from system before removing tubing.
Follow proper procedure to disconnect tubing from compressor.
Keep debris and moisture from entering system.
3. Remove compressor
Remove the bolts holding down the compressor to the chassis.
Remove the compressor.
Mark location and
color of wires
To Next Page
Loading...