114
Disassembly of Outdoor Unit
24,000 & 30,000 btuh Warning - Wait 10 minutes aer power is disconnected before starting disassembly.
1. Before disassembly
2. Remove handle
Remove the screws connecting the handle, pull the handle upward
to remove it.
3. Remove wire connection cover
Remove the screws connecting the handle
Handle
Wire connector cover
4. Remove top cover
Remove the screws holding the top cover, panel, le and right
sides to remove the top cover.
5. Remove grille
Remove the screws holding the grille and panel, then remove the
grille.
6. Remove panel
Remove the screws holding the panel, chassis and motor to re-
move the panel.
Panel
Grille
Top cover
To Next Page
Loading...