115
Disassembly of Outdoor Unit, continued
24,000 & 30,000 btuh Warning - Wait 10 minutes aer power is disconnected before starting disassembly.
7. Remove right side panel
Remove the screws holding the right side panel, valve support and
guard grille,. to remove the right side panel
8. Remove guard grille
Remove the screws holding the guard grille and le side panel to
remove guard grille
9. Remove le side panel
Remove the screws holding the panel to the chassis and condenser
support.
10. Remove condenser support
Remove the screws holding the support and chassis, then remove
the support.
11. Remove axial fan blade
Remove the screws holding the fan blade on the fan, then remove
blade.
12. Remove motor and motor support sub-assy.
Remove the screws holding the motor, pull out the pin of leading
wire for motor and remove the screws holding the support and
chassis.
Le side panel
Guard grille
Right side panel
Condenser support
Axial fan blade
Motor support sub-assy
To Next Page
Loading...