Gree Vireo GEN3 3VIR09HP115V1AH - Page 93

90
Installation and Maintenance
Service Manual
Step Procedure
4.Remove front side plate and front panel
a
Remove screws connecting front side plate, outer
case and chassis,and then remove the front side
plate.
b
Remove screws xing front panel,chassis and motor
support, and then remove the front panel.
5.Remove right side plate
Remove screws connecting right side plate and
chassis, valve support and condenser, and then
remove the right side plate.
front side plate
front panel
right side plate
11. Removal Procedure