Wired Controller XK55
27
modes, it might change based on unit condition.
When power is on, click the temperature adjustment button to adjust and set
temperature. Temperature range: 16℃~30℃.
NOTE: under auto mode, the temperature adjustment button is invalid.
Click ON/OFF button to turn on/off the unit.
When power is on, click the fan speed button to switch fan speed. For every
click, the fan speed will be circulated according to the following sequence:
Auto fan speed
->Low ->Medium and low ->Medium ->Medium and
high ->Medium and high ->Auto fan speed
NOTES:
① Under drying mode, the defaulted fan speed is low and it is unadjustable;
② Under floor heating mode, the fan speed is invalid.
Click up and down swing button to start/shut down up and down swing;
Click menu button to enter menu list.
5.2.2 Menu list
Fig 5.3 Menu list
To Next Page
Loading...
