Greenlee Textron Inc. / Subsidiary of Textron Inc.
6
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
764 Ratchet Cable Cutter
Operation
Electric shock hazard:
This is not an insulated tool.
Contact with live circuits could
result in severe injury or death.
• This tool is intended for two-handed operation.
Maintain a firm grip on both handles when using
this tool.
• Inspect before use. Replace any worn or
damaged parts.
Failure to observe these precautions could result in
injury or property damage.
1. Place the cable to be cut between the jaws.
2. Press the handles together until the ratchet clicks
once.
3. Open the handles until the ratchet clicks again.
4. Repeat steps 2 and 3 until cable is completely cut.
5. To open the blades, lift the movable handle until it
stops. Press the release knob outward as shown.
Wear eye protection when using
this tool.
To Next Page
Loading...
