To Next PageTo Next Page
Need help?Do you have a question about the Greenlee GATOR EK12ID and is the answer not in the manual?
General| Model | GATOR EK12ID |
|---|---|
| Crimping Force | 12 tons |
| Power Source | Battery |
| Battery Voltage | 18V |
| Handle Type | Ergonomic |
| Type | Hydraulic crimp tool |
| Length | 18.5 inches (470 mm) |
| Crimp Type | Indent crimp |
| Material | Steel |
Covers electrical, hydraulic, fire, and pinch point safety warnings.
Precautions for handling and storing batteries to prevent shorts and damage.
Guidelines for tool operation, environmental use, and unauthorized maintenance.
Essential safety checks before operating the tool, including electrical, eye protection, and fire hazards.
Cautions on continuous use, environmental conditions, vise use, and cUL/UL classification.
Detailed steps for inserting cable, positioning connector, and initiating the crimp cycle.
Finalizing the crimp, retracting the indenter, and removing the connector.
Daily checks for wear, damage, and cleaning after use.
Procedure for testing the pressure relief valve function using specialized equipment.
Identifies common issues and provides corresponding probable causes and remedies.
Step-by-step guide for replacing the indenter component of the tool.
