Greenlee GATOR EK6IDL - User Manual

SERVICE MANUAL
GATOR
®
Battery-powered
In-line Tools
52054765 REV 6 © 2014 Greenlee Textron Inc. 7/14
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
Register this product at www.greenlee.com
(EK410L shown)

Summary

Important Safety Information

Safety Alert Symbol and Signal Word Definitions

Explains the meaning of safety symbols and severity levels used.

Specific Safety Warnings and Precautions

Covers hazards like skin injection, flammables, battery disposal, and operational safety.

Head and Ram Illustration and Parts List-EK6 IDL

Head and Ram Illustration and Parts List-EK210 L

Head and Ram Illustration and Parts List-EK410 L

Head and Ram Illustration and Parts List-EK622 L

Ram Illustration and Parts List-EK628 L

Crimping Jaw Units Illustration and Parts List-EK628 L

Optional Accessories Illustration and Parts List-EK628 L

Head and Ram Illustration and Parts List-ETS8 L

Head and Ram Illustration and Parts List-ETS12 L

Head and Ram Illustration and Parts List-ES32 L, ES32 FL, and ES20 L

Head and Ram Illustration and Parts List-ESG25 L

Head and Ram Illustration and Parts List-LS50 L

Head and Ram Illustration and Parts List-LS100 L

Greenlee GATOR EK6IDL Specifications

General

Model	GATOR EK6IDL
Type	Hydraulic Crimping Tool
Battery Voltage	18V
Motor	Brushless
Voltage	18V
Crimping Capacity	6 AWG - 750 kcmil Cu/Al
Hole Size Range	6-600 kcmil