To Next PageTo Next Page
Need help?Do you have a question about the Greenlee GATOR EK6IDLX and is the answer not in the manual?
General| Type | Hydraulic Crimping Tool |
|---|---|
| Battery Voltage | 18 V |
| Voltage | 18 V |
| No Load Speed | Not applicable |
| Max Torque | Not applicable |
| Horsepower | Not applicable |
| Tool Type | Battery-Powered |
| Crimping Capacity | 6 AWG to 750 MCM |
Explains the meaning of safety alert symbols (Danger, Warning, Caution) and signal words.
Highlights the necessity of reading and understanding all instructions before operating the tool.
Covers electrical shock, skin injection, solvent use, fire, and pinch point hazards.
Details safe practices for battery disposal, transport, storage temperature, and charger usage.
Advises on tool inspection, continuous use limits, and operating in damp environments.
Covers tool inspection, electrical, eye protection, and pinch point safety warnings.
Instructions for charging the tool's battery using the recommended charger.
Explains the function and meaning of the tool's LED work light and indicator.
Describes the pressure sensor's role in detecting incomplete crimps and tool alerts.
Outlines the sequence for preparing the cable and connector for the crimping process.
Lists compatible connectors for copper and aluminum cables based on classification requirements.
A comprehensive list of error codes and their corresponding meanings for troubleshooting.
Instructions on how to cycle through and view normal operating data on the LCD screen.
Procedures for daily inspection of tool for wear or damage and basic cleaning.
Covers monthly cleaning and annual service requirements like hydraulic oil replacement.
Basic checks to perform before diagnosing tool inoperability or other issues.
A table listing common problems, their possible causes, and probable remedies.
