EasyManua.ls Logo

Greenlee GATOR LS50L2 User Manual

Greenlee GATOR LS50L2
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATION MANUAL
GATOR
®
LS50L2
Battery-powered Punch Driver
52083543 © 2017 Greenlee Textron Inc. 8/17
Serial Number
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
Question and Answer IconNeed help?

Do you have a question about the Greenlee GATOR LS50L2 and is the answer not in the manual?

Greenlee GATOR LS50L2 Specifications

General IconGeneral
ModelLS50L2
CategoryPower Tool
Voltage18V
Battery18V Li-Ion
ColorGreen
Warranty5 years

Summary

Description of the LS50L2 Punch Driver

Safety Information

General Safety Symbols and Warnings

Explains safety alert symbols (Danger, Warning, Caution) and general hazards.

Component Failure and Operation Hazards

Covers risks from component failure, punching multiple layers, exceeding capacity, improper setup, and battery disposal.

Usage and Battery Precautions

Details on continuous use, battery storage, charger use, battery handling, and unauthorized service.

Identification of Tool Parts

Specifications

Setup and Operation

General Safety Precautions for Setup

Warnings about tool inspection, electrical hazards, eye protection, and pinch points during setup.

Battery Charging and Status Indicators

Instructions for charging the battery and understanding LED indicator signals.

Punching Procedure Steps

Detailed steps for selecting punch, drilling pilot hole, and assembling/using the punch.

Punching Mild Steel Conduit Sizes

Examples of punching mild steel using various conduit sizes and components.

Punching Mild & Stainless Steel Conduit Sizes

Examples for mild and stainless steel conduit punching with different sizes and components.

Punching Square, Rectangular & Shaped Holes

Examples of punching square, rectangular, and special shaped holes with specific dies and studs.

Punching Large Square/Rectangular & Panel Holes

Examples for large square/rectangular and electronic connector panel punch operations.

Capacity and Draw Stud Selection Guide

Maintenance Procedures

Daily, Monthly, and Annual Maintenance

Tasks for daily, monthly, and annual checks, including oil level and replacement.

Checking Hydraulic Oil Level

Step-by-step guide on how to check and refill the hydraulic oil.

Safety Warnings for Maintenance

Critical safety warnings (eye protection, skin injection, cleaning, pinch points) during maintenance.

Troubleshooting Guide

Initial Troubleshooting Steps

Basic checks before diagnosing problems, including battery charge and contact cleaning.

Common Tool Problems and Remedies

Identifies common issues like inoperative tool, motor problems, and dies stopping, with probable solutions.

Related product manuals