Need help?Do you have a question about the Greenlee 724 and is the answer not in the manual?
General| Brand | Greenlee |
|---|---|
| Model | 724 |
| Category | Power Tool |
| Language | English |
Warning about potential electric shock hazard from uninsulated tool contacting live circuits.
Mandatory use of eye protection to prevent serious injury from flying debris.
Caution against adding extensions to handles due to risk of injury or damage.
Inspect tool before use, use only Greenlee replacement parts. Damaged tools can break.
Use the tool only for its intended manufacturer purpose to avoid injury or damage.
Do not use the tool on materials heavier than 20 gauge mild steel.
The Greenlee 724 BX Stud Punch creates 32 mm square holes in metal studs up to 20 gauge.
Position punch on stud and squeeze handles to create a 32 mm square hole with rolled edges.
Safety is essential; manual and markings provide info for avoiding hazards and unsafe practices.
This manual familiarizes personnel with safe operation and maintenance procedures for the 724 BX Stud Punch.
Diagram illustrating the parts of the 724 BX Stud Punch with key identifiers.
List of parts including part number, description, and quantity for the 724 BX Stud Punch.
To Next Page