5
Using FRIDGE
Cleaning
It is best to clean FRIDGE every 6 months.
1. Remove FRIDGE from your refrigerator and turn it off.
2. Vacuum out the Rear Air Intake and the Top Air Vent.
Note: Blowing air into the Rear Air Intake or Top Air Vent in order to clean FRIDGE is not advised.
Doing so may limit the quality of the purified air produced by FRIDGE.
3. Dip a cotton swap in isopropyl alcohol and insert it into the Top Air
Vent. Gently rotate the swab and clean the entire area until all visible
contamination has been removed. Use a clean cotton swab to dry the
cleaned area. Repeat with the Rear Air Intake.
4. Wipe down the outside of FRIDGE with a damp cloth.
5. Let FRIDGE dry before charging or resuming operation.
If you need help, have questions, or have any problems contact your dealer or
Greentech Environmental at (800) 957-1136 or Greentechenv.com/support.
To Next Page
Loading...
