Greenwood Unity CV2GIP - General Overview

Time ‘Switch Live’ is Active
0 – 5 minutes
5 – 10 minutes
10 – 15 minutes
15+ minutes
Over-run Boost Period
No over-run
5 minutes
10 minutes
15 minutes
The specific operation of your fan may vary depending on the way it has been installed.
The options are –
Trickle Speed: Operating on a continual basis.
Boost Speed: Activated manually using our GS2 switch or via the room light switch.
GS2 switch markings - Trickle (I) & Boost (II) Operation
Note: Other manufacturers switches may show different markings.
To maintain a healthy indoor environment the Unity CV2GIP / CV2SVGIP includes SMART
technology for Over-run T
imer (Greenwood TimerSMART
TM
) and Humidity
(Greenwood HumidiSMART
TM
).
Greenwood TimerSMART
TM
monitors the length of time that there is an occupancy
presence within a wet room (via the ‘switch-live’) and provides a fixed over-run time
period to best match the length of time that the ‘switch live’ is active (as shown below):
Note: The first 5 minutes will not activate an over-run.
This removes nuisance running noise and unnecessary energy wastage typically
associated with traditional timers.
4
2.0 General Overview
2.1.1
2.1.2
2.1.3
II
I