10
The Unity CV2GIP / CV2SVGIP contains a unique backward curved mixed flow impellor
that has been designed to reduce against any build up of dirt. The fan motor has sealed
for life bearings, which do not require lubrication.
Periodic cleaning of the fans front cover and casing can be carried out using a soft damp
cloth. Care must be taken when wiping around the control panel.
Warning: The Unity CV2GIP / CV2SVGIP must be isolated from the mains supply before
removing the electronics cover. Do not use solvents to clean this fan.
Cleaning and user maintenance shall not be made by children without supervision.
Please note that your stored fan settings will not be lost during any interruptions to
your fan’s power supply.
4.0 Servicing / Maintenance
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
This section should be used to record all installation details. The Commissioning Engineer
should use the following Parts 1 to 3, to record important information relating to the
installation, of which, should be incorporated into the Home Information Pack for the
homeowner to keep.
• Part 1 – System details and declarations
• Part 2a – Installation details
• Part 2b – Inspection of installation
• Part 3 – Air flow measurement test and commissioning details
5.0 Commissioning & Inspection Record
5.1.1
To Next Page
Loading...
